BLOG  | SITE MAP  | CONTACT  | DEALER LOCATOR 
HouzzFacebookTwitterYouTubeLinkedInPinterest
Raynor
HOME   |   CORPORATE   |   PRODUCTS   |   HOMEOWNERS   |   CONTRACTORS   |   ARCHITECTS   |   DEALERWEB
Products
  Residential Products
  Commercial Products
– Sectional Doors
   • TC Series
   • ThermaSeal
   • TH160
   • SteelForm
   • AlumaView
   • Commercial Aspen
   • StyleForm
   • FlexFit FF175
   • TradeMark
   • BuildMark
– Rolling Doors
– Performance Doors
– Fire Doors
– Traffic Doors
– Operators
– Specifications
– Choosing a Door
– Loading Dock Doors
– Agricultural Doors
– IECC Compliant
  Dealer Locator
  Literature
 
  Commercial Specifications and Drawings
Paint Formulas
Commercial Sectional Garage Door Comparison
    AlumaView
AV300
  AlumaView
AV200
  AlumaView
AV175
 
 
Door
Size
  24' x 24' Max   24' x 24' Max   16' x 14' Max  
Operation
  Manual, Motor or Hand Chain   Manual, Motor or Hand Chain   Manual, Motor or Hand Chain  
IECC Air Filtration Performance
  Tested Air Infiltration @ 25 mph 0.24 cfm/ft2   Tested Air Infiltration @ 25 mph 0.24 cfm/ft2   N/A  
Sections
Construction
  Rail & Stile - minimum .063"; 5/16" diameter screws   Rail & Stile - minimum .05"; 5/16" diameter screws   Rail & Stile - minimum .05", 5/16" diameter screws  
Material
  Aluminum   Aluminum   Aluminum  
Surface Texture
  Smooth   Smooth   Smooth  
Joint
  Ship Lap   Tongue-Groove   Ship Lap  
Gauge
  N/A   N/A   N/A  
Stiles
  Extruded aluminum - minimum .05"   Extruded aluminum - minimum .05"   Extruded aluminum - minimum .05"  
Insulation
  3/8" Expanded Polystyrene (in panels only)   3/8" Expanded Polystyrene (in panels only)   3/8" Expanded Polystyrene (in panels only)  
Seals
  Bottom Seal (3", 4" Gray; 3" Yellow; or 3" Black EPDM), Optional Header Seal. Optional IECC and California Title 24 air filtration compliant package available.   Bottom Seal (3", 4" Gray; 3" Yellow; or 3" Black EPDM), Optional Header Seal. Optional IECC and California Title 24 air filtration compliant package available.   Bottom Seal (3", 4" Gray; 3" Yellow; or 3" Black EPDM), Optional EPDM Header Seal  
Trussing
  Wind Load: 20 P.S.F. Tested/13.3 P.S.F. Design Load (standard); Material: U-bar (18-Gauge or 20-Gauge);Sizes: 4", 6", or 8"   Wind Load: 20 P.S.F. Tested/13.3 P.S.F. Design Load (standard); Material: U-bar (18-Gauge or 20-Gauge);Sizes: 4", 6", or 8"   Material: Optional U-bar (18-Gauge or 20-Gauge - can have up to 1 U-bar per door)  
Panels
  .50" thick Aluminum panels   .50" thick Aluminum panels   NA  
Color
  Clear Anodized or Optional ArmorBrite Powder-Coat 187 custom colors available, or Bronze Anodized, Black Anodized   Clear Anodized or Optional ArmorBrite Powder-Coat 187 custom colors available, or Bronze Anodized, Black Anodized   Clear Anodized or Optional ArmorBrite Powder-Coat 187 custom colors available, or Bronze Anodized, Black Anodized  
Windows
  1/8" DSB Glass; 1/8" 1/4" 3/16" Clear Tempered Glass; 1/8" 1/4" Tinted or Tinted Tempered Glass; 3/16" 1/4" Clear Glass; 1/4" Clear Laminated Glass; 1/4" Clear Wire Glass; 1/2" Insulated DSB Glass   1/8" DSB Glass; 1/8" 1/4" 3/16" Clear Tempered Glass; 1/8" 1/4" Tinted or Tinted Tempered Glass; 3/16" 1/4" Clear Glass; 1/4" Clear Laminated Glass; 1/4" Clear Wire Glass; 1/2" Insulated DSB Glass   1/8" DSB Glass; 1/8" 1/4" 3/16" Clear Tempered Glass; 1/8" 1/4" Tinted or Tinted Tempered Glass; 3/16" 1/4" Clear Glass; 1/4" Clear Laminated Glass; 1/4" Clear Wire Glass; 1/2" Insulated DSB Glass  
Track
Type
  Normal Headroom, Rear Mount Low Headroom, Front Mount Low Headroom, Lift Clearance, Vertical Lift, Incline, Contour   Normal Headroom, Rear Mount Low Headroom, Front Mount Low Headroom, Lift Clearance, Vertical Lift, Incline, Contour   Normal Headroom, Rear Mount Low Headroom, Front Mount Low Headroom, Lift Clearance, Vertical Lift, Incline, Contour  
Finish
  Galvanized or Optional White Powdercoat   Galvanized or Optional White Powdercoat   Galvanized or Optional White Powdercoat  
Size
  2" or 3"   2" or 3"   2" or 3"  
Gauge
  13 and 16-gauge   13 and 16-gauge   13 and 16-gauge  
Counterbalance System
Type
  Torsion Spring, Tandem Shaft Torsion Spring, or Weight Counter-Balance   Torsion Spring, Tandem Shaft Torsion Spring, or Weight Counter-Balance   Torsion Spring, Tandem Shaft Torsion Spring, or Weight Counter-Balance  
Springs
  Spring Inner Diameter: 2-1/4", 3-1/2" or 5-1/2"; Duplex or High Cycle (30K, 50K, 100K); Optional Black Powdercoat   Spring Inner Diameter: 2-1/4", 3-1/2" or 5-1/2"; Duplex or High Cycle (30K, 50K, 100K); Optional Black Powdercoat   Spring Inner Diameter: 2-1/4", 3-1/2" or 5-1/2"; Duplex or High Cycle (30K, 50K, 100K); Optional Black Powdercoat  
Shafts
  Tube or Solid (D-Shaft, 1" Keyed, 1-1/4" Keyed)   Tube or Solid (D-Shaft, 1" Keyed, 1-1/4" Keyed)   Tube (13 gauge) or Solid (D-Shaft, 1" Keyed)  
Hardware/Accessories
Hinges
  11, 13, 14-Gauge or Hybrid   11, 13, 14-Gauge or Hybrid   11, 13, 14-Gauge or Hybrid  
Rollers
  Standard (2" or 3") or Heavy Duty (2" or 3")   Standard (2" or 3") or Heavy Duty (2" or 3")   Standard (2" or 3") or Heavy Duty (2" or 3")  
Finish
  Galvanized or Optional White Powdercoat   Galvanized or Optional White Powdercoat   Galvanized or Optional White Powdercoat  
Lock
  Interior Slide Lock or Exterior Lock Bars   Interior Slide Lock or Exterior Lock Bars   Interior Slide Lock or Exterior Lock Bars  
Seal
  Jamb Seal   Jamb Seal   Jamb Seal  
Hanger Angle
  11, 13-Gauge Galvanized or 13-Gauge White Powdercoated   11, 13-Gauge Galvanized or 13-Gauge White Powdercoated   11, 13-Gauge Galvanized or 13-Gauge White Powdercoated  
Pedestrian Door
  NA   32" Wide x 3 Sections High   NA  
Wind Load Systems
  Certified Wind Load Available   Certified Wind Load Available   NA  
Posts
  NA   Swing-Up or Carry-Away   N/A  
Warranty
Section
  5-Year   5-Year   5-Year  
Hardware
  1-Year   1-Year   1-year  
Springs
  1-Year   1-year   1-year