SITE MAP  | CONTACT  | DEALER LOCATOR    FacebookTwitterYouTubeLinkedInPinterest
Raynor
HOME   |   CORPORATE   |   PRODUCTS   |   HOMEOWNERS   |   CONTRACTORS   |   ARCHITECTS   |   DEALERWEB
Homeowners
  Product Overview
  Door Fundamentals
  Customer Care
  Quick Tips
  Warranties
  Reprogram Remote
  Dealer Locator
Design-A-Door

How do I add or reprogram a hand-held remote control?

Press and release the LEARN button on the overhead garage door opener unit. The learn indicator light will glow steadily for 30 seconds. Within this 30 second time period, press and hold the button on the hand-held remote. Next, release the button when the overhead opener unit's lights blink. If light bulbs are not installed on your opener, then two clicks will be heard.

To erase all codes from motor unit memory:
Press and hold the LEARN button on motor unit until the learn indicator light goes out (approximately 6 seconds). All previous codes are now erased. Reprogram each remote or keyless entry you wish to use. and hold the ENTER button. Next, release the button when the overhead opener unit's lights blink. If light bulbs are not installed on your opener, then two clicks will be heard.

If your garage door opener is compatible with the HomeLink® system, follow these easy steps to set it up.