SITE MAP  | CONTACT  | DEALER LOCATOR    FacebookTwitterYouTubeLinkedInPinterest
Raynor
HOME   |   CORPORATE   |   PRODUCTS   |   HOMEOWNERS   |   CONTRACTORS   |   ARCHITECTS   |   DEALERWEB
Homeowners
  Product Overview
  Door Fundamentals
  Customer Care
  Quick Tips
– Measuring
– Lubricating
– Cleaning
– Balancing
– Painting
– New Remote
– Keyless Entry
– PIN Number
– HomeLink® System
  Warranties
  Reprogram Remote
  Dealer Locator
Design-A-Door

How do I program my keyless entry keypad?

Using a multi-function door control -
(Please note that this process requires two people if the keyless entry keypad is already mounted outside the garage.) Enter a four digit personal identification number (PIN) of your choice on the keypad. Then press and hold ENTER. While holding the ENTER button, press and hold the LIGHT button on the keypad. Next, continue holding ENTER and LIGHT buttons while you press the push bar on the keypad (all three buttons are held). You may release the buttons when the overhead opener unit's lights blink. If light bulbs are not installed on your garage door opener, then two clicks will be heard.

Using the LEARN button -
Press and release the LEARN button on the overhead opener unit. The learn indicator light will glow steadily for 30 seconds. Within this 30 second time period, enter a four digit personal identification number (PIN) of your choice on the keypad. Then press and hold the ENTER button. Next, release the button when the overhead opener unit's lights blink. If light bulbs are not installed on your garage door opener, then two clicks will be heard.