|
|
|
|
|
|
|
| |
|
|
|
|
|
| |
Door |
Size |
|
24' with Slat Restrictions
|
|
18' with Slat Restrictions
|
|
Operation |
|
Manual, Hand Chain; Motor: Bracket or Wall Mount
|
|
Manual, Hand Chain; Motor: Bracket or Wall Mount
|
|
Drive |
|
Left or Right Hand
|
|
Left or Right Hand
|
|
Fire Rating |
|
3-Hour Factory Mutual, 4-Hour Underwriters Laboratory
|
|
3-Hour Factory Mutual, 4-Hour Underwriters Laboratory
|
|
Fire Listing |
|
FM, UL, CSFM, ISO-3008, C-UL
|
|
FM, UL, CSFM, ISO-3008, C-UL
|
|
Curtain |
Slat Type |
|
Large Contour, Flat
|
|
Small Contour, Large Contour, Flat
|
|
Endlocks/Baffled Endlocks |
|
Zinc Plated Cast Iron
|
|
Zinc Plated Malleable Cast Iron
|
|
Material |
|
Steel
|
|
Steel
|
|
Gauge |
|
18-Gauge
|
|
20 or 22-Gauge
|
|
Bottom Bar |
|
Hot-Rolled
|
|
Hot-Rolled
|
|
Color/Finish |
|
Standard: Gray or Tan; Optional ArmorBrite Powdercoated or Galvanized
|
|
Standard: Gray or Tan; Optional ArmorBrite Powdercoated or Galvanized
|
|
Guides |
Mounting |
|
Face (E or Z) or Jamb
|
|
Face (E or Z) or Jamb
|
|
Guide Constuction |
|
Hot-Rolled Steel Angle
|
|
Hot-Rolled Steel Angle
|
|
Jamb Constuction |
|
Steel, Masonry or Non-masonry
|
|
Steel, Masonry or Non-masonry
|
|
Wear Strips |
|
Polyethelene Tape (UHMW)
|
|
Polyethelene Tape (UHMW)
|
|
Color/Finish |
|
Black or ArmorBrite Powdercoated
|
|
Black or ArmorBrite Powdercoated
|
|
Counterbalance System |
Type |
|
Torson Spring System (Standard or High-Cycle) or SureTest Weight Counter Balance
|
|
Torson Spring System (Standard or High-Cycle) or SureTest Weight
|
|
Head Plates |
|
Thickness: 3/16", 1/4", 3/8", 1/2"
|
|
Thickness: 3/16", 1/4", 3/8", 1/2"
|
|
Barrel |
|
Size: 4", 6", 8", 10"
|
|
Size: 4", 6", 8", 10"
|
|
Springs |
|
Inside Diameters: 2-7/8", 4-9/16", 6-1/4", 8-3/8"; Configuration: Single, Duplex, Tri-Plex
|
|
Inside Diameters: 2-7/8", 4-9/16", 6-1/4", 8-3/8"; Configuration: Single, Duplex, Tri-Plex
|
|
Bearing Plug Assembly |
|
Removable: 4" or 6"; Welded: 8", 10", 12"
|
|
Removable: 4" or 6"; Welded: 8", 10", 12"
|
|
Shafts |
|
Solid Shaft: 1", 1-1/4", 1-1/2", 1-3/4"
|
|
Solid Shaft: 1", 1-1/4", 1-1/2", 1-3/4"
|
|
Ring-Splits |
|
As required
|
|
As required
|
|
Counterbalance Hardware |
|
Includes all required components.
|
|
Includes all required components.
|
|
Enclosures |
Hood |
|
Type: Round; Material: Steel (24 ga.)
|
|
Type: Round; Material: Steel (24 ga.)
|
|
Weight Counterbalance Cover |
|
Material: Steel (24 ga.)
|
|
Material: Steel (24 ga.)
|
|
HeadPlate Cover |
|
Material: Steel (24 ga.)
|
|
Material: Steel (24 ga.)
|
|
Color/Finish |
|
Standard: Gray or Tan; Optional ArmorBrite Powdercoated
|
|
Standard: Gray or Tan; Optional ArmorBrite Powdercoated
|
|
Release System |
Type |
|
Fusible Links (McCabe, Globe); Electro-Thermal Links (Standard, Manual, Manual with Junction Box); Solid State Fail-Safe Units (LM21XP, LM21XPBB, LM21AFCB)
|
|
Fusible Links (McCabe, Globe); Electro-Thermal Links (Standard, Manual, Manual with Junction Box); Solid State Fail-Safe Units (LM21XP, LM21XPBB, LM21AFCB)
|
|
Descent Control |
|
Mechanical Oscillating, Viscus Governor, Centrifugal Governor
|
|
Mechanical Oscillating, Viscus Governor, Centrifugal Governor
|
|
Hardware/Accessories |
Miscellaneous Parts |
|
Curtain Stops, Hood Support
|
|
Curtain Stops, Hood Support
|
|
Nuts/Bolts |
|
Headplate Bolts, Lag Screws, Thread Cutters, Masonry Anchors, Hood Screws, Drive Pins
|
|
Headplate Bolts, Lag Screws, Thread Cutters, Masonry Anchors, Hood Screws, Drive Pins
|
|
Lock |
|
Locking Bars, Hand-Chain Lock, or Cylinder Lock
|
|
Locking Bars, Hand-Chain Lock, or Cylinder Lock
|
|
Seals |
|
Header Brush, Flame Baffle, Guide Brush
|
|
Header Brush, Flame Baffle, Guide Brush
|
|
Detection Equipment |
|
Ionization, Photo-Electric, Heat
|
|
Ionization, Photo-Electric, Heat
|
|
Warranty |
Counterbalance |
|
1 Year or Cycle Life
|
|
1 Year or Cycle Life
|
|
Parts |
|
1 Year
|
|
1 Year
|
|
